580W Peak Power Semi-Flexible Solar Panel - High Voltage, TOPCon Cell for Large Scale Systems

580W Peak Power Semi-Flexible Solar Panel – High Voltage, TOPCon Cell for Large Scale Systems

Introducing the pinnacle of our semi-flexible solar line: the 580W module, engineered to deliver maximum energy density for large-scale commercial and industrial systems. This panel achieves the highest power output in its class, featuring an elevated operating voltage that minimizes energy loss over long wire runs. It is the ultimate solution for system designers and installers seeking to maximize the power generation of every square meter on expansive rooftops and ground-mounted arrays, all while leveraging the lightweight and versatile benefits of semi-flexible technology.

Product Introduction
As the flagship model in our series, this 580W solar module is designed for projects where maximizing return on investment is paramount. It combines the highest available wattage with the practical advantages of a semi-flexible form factor. This makes it exceptionally effective for reducing balance-of-system costs in large installations, as fewer panels are needed to achieve target power outputs, and mounting becomes simpler and less material-intensive.

Key Features & Selling Points

• Maximum Power Output: At 580W, this panel offers top-tier energy density, perfect for maximizing power generation in space-constrained or large-scale deployments.

• High System Voltage Design: A higher optimum operating voltage (Vmp) reduces current, which minimizes power loss in long cable runs, increasing overall system efficiency.

• Advanced TOPCon Cell Technology: Ensures superior performance, higher efficiency, and better temperature coefficient compared to conventional PERC cells.

• Lightweight & Low-Profile: Dramatically reduces structural load and wind profile, enabling installation on a wider variety of roofs without reinforcement.

• Robust Mechanical Strength: Withstands significant snow (5400 Pa) and wind (2400 Pa) loads, ensuring long-term reliability in harsh climates.

• Industry-Leading Warranty: Protected by a 12-year product warranty and a 25-year linear power warranty for guaranteed long-term performance.

Technical Specifications

Technology & Working Principle
This module leverages cutting-edge TOPCon (Tunnel Oxide Passivated Contact) N-type silicon cell technology. The core of its performance lies in an ultra-thin oxide layer that passivates the rear surface of the cell, drastically reducing charge carrier recombination. This results in a higher open-circuit voltage (Voc) and a much lower power loss coefficient at elevated temperatures. The combination of these high-efficiency cells with a durable, flexible backsheet creates a panel that is not only powerful but also resilient and adaptable to various mounting surfaces.

Application Scenarios

The versatility of this flexible 120W panel opens up a wide array of applications across diverse sectors:

• Building & Construction Integration: Ideal for commercial and industrial roofs with limited load-bearing capacity, where its lightweight nature eliminates structural concerns. It is also the perfect solution for curved and special architectural structures, such as arched canopies, awnings, and heritage buildings, enabling seamless solar integration without compromising design.

• Transportation Infrastructure: Can be deployed on highway slopes and noise barriers, turning underutilized public infrastructure into efficient power-generating assets, contributing to smart city and greenway projects.

• Agriculture & Aquaculture: Excellently suited for PV agricultural greenhouses and flower markets, where its semi-transparent properties and light weight allow for simultaneous crop growth and solar generation, reducing energy costs for climate control.

• Portable & Mobile Energy Systems: Perfect for balcony PV systems (BIPV) for urban residents, and for integration onto the roofs of vehicles, buses, and train carriages. This provides auxiliary power for air conditioning, lighting, and electronic devices, enhancing energy independence for mobile applications.

​

Frequently Asked Questions (FAQ)

Q: How does the high voltage (Vmp) benefit a large installation?
A: A higher voltage allows for longer string lengths without exceeding inverter voltage limits. This reduces the number of wires, combiner boxes, and labor required, significantly lowering the overall balance-of-system costs.

Q: Is this 580W panel suitable for residential use?
A: While technically possible, its design is optimized for larger commercial and industrial systems. For most homes, a lower-wattage residential panel is typically more cost-effective.

Q: Can these panels be used with microinverters?
A: Yes, they are fully compatible with modern microinverters. The high power output makes them an excellent choice for microinverter-based systems, maximizing energy harvest from each panel.

Q: What makes this panel 'semi-flexible' and how much can it bend?
A: It uses a flexible polymer composite instead of a rigid aluminum frame and glass. This allows it to conform to slightly curved surfaces. The specific maximum bending radius should be confirmed during system design to prevent damage.

Important Notes

• System design must ensure the maximum system voltage (1000V DC) is not exceeded, especially in cold conditions when Voc rises.

• Professional installation is crucial to ensure proper bonding, grounding, and electrical safety.

• Avoid shading across the panel, as it can disproportionately affect power output. Use bypass diodes correctly in the system design.

• Always use certified MC4 connectors and compatible wiring to handle the specified current and voltage.

​

Our Advantages

We provide cutting-edge solar solutions that redefine where and how solar power can be deployed. Our core advantages are rooted in superior engineering and a deep understanding of real-world application challenges:

• Ultimate Lightweight & Flexible Design: Our modules boast an exceptionally low weight of just 2.7kg/m² (approximately 30% of traditional glass modules) and an ultra-thin profile of only 2.7mm. This revolutionary form factor eliminates concerns for weight-restricted roofs and enables perfect conformity to various curved surfaces.

• Rackless Installation & Superior Convenience: The flexible and lightweight nature allows for installation typically without complex metal racking systems. The modules can be directly adhered or simply fastened, significantly reducing installation complexity, labor costs, and time, offering unparalleled ease of deployment.

• Proven High Reliability: The product has successfully passed multiple stringent TÜV SÜD tests, including hail impact, mechanical load, and humidity freeze tests. This ensures stable power output and long-term performance durability even in harsh environments, providing you with complete peace of mind.

​​

Our Service Capabilities

We go beyond manufacturing to be your comprehensive solar energy partner. Our integrated service portfolio ensures your project is successful from concept to completion.

• End-to-End Solutions: We provide tailored, end-to-end solar energy solutions designed to meet your specific energy needs and site conditions, from initial consultation to final commissioning.

• Expert Roof Integration Design: Our team specializes in rooftop layout planning and integration design, ensuring optimal system performance, structural safety, and seamless aesthetics for both flat and curved surfaces.

• Professional Electrical System Design: We deliver complete electrical design support, including string sizing, cable routing, and compatibility with inverters and energy storage systems, guaranteeing a safe, efficient, and code-compliant installation.

• One-Stop Packaged Systems: Simplify your procurement process. We offer a one-stop-shop for all necessary components, including compatible mounting hardware, connectors, and cabling, ensuring system compatibility and reducing sourcing time and complexity.

​